What you need:
•Lots of Sticks
• Corrugated cardboard
• Natural jute, 4-ply, #72 (optional)
• Pruning shears or sharp craft knife
• Ruler
• Pencil
• Scissors
• Waxed paper
• Craft stick
• Tacky glue

What you do:
Step 1: Ask an adult to help you use pruning shears (or a sharp craft knife) to cut the sticks into three-inch lengths. Use sticks that are as straight as possible. You will need about 25 to 30 pieces.
Step 2: Measure and cut a piece of cardboard into a 6-inch square.
Step 3: Place the cardboard square onto waxed paper. Scoop glue from bottle with the craft stick and spread glue in a thick layer over entire cardboard surface.
Step 4: Lay the sticks in a parquet pattern (see photograph, below). Place the sticks as close to each other as possible. Let glue dry completely.
Step 5: Squeeze a thick line of glue around the outside edge of the trivet. Starting in the center of a side, place the jute in the glue and press firmly to the edge of the trivet.When you reach the beginning of the jute, overlap the ends slightly. Let the glue dry