Twig Trivet

What you need:
•Lots of Sticks
• Corrugated cardboard
• Natural jute, 4-ply, #72 (optional)
• Pruning shears or sharp craft knife
• Ruler
• Pencil
• Scissors
• Waxed paper
• Craft stick
• Tacky glue

What you do:
Step 1: Ask an adult to help you use pruning shears (or a sharp craft knife) to cut the sticks into three-inch lengths. Use sticks that are as straight as possible. You will need about 25 to 30 pieces.
Step 2: Measure and cut a piece of cardboard into a 6-inch square.
Step 3: Place the cardboard square onto waxed paper. Scoop glue from bottle with the craft stick and spread glue in a thick layer over entire cardboard surface.
Step 4: Lay the sticks in a parquet pattern (see photograph, below). Place the sticks as close to each other as possible. Let glue dry completely.
Step 5: Squeeze a thick line of glue around the outside edge of the trivet. Starting in the center of a side, place the jute in the glue and press firmly to the edge of the trivet.When you reach the beginning of the jute, overlap the ends slightly. Let the glue dry

Be Sociable, Share!

Speak Your Mind

*