DIY Soap

DIY Soap cover

Over 2,000 pounds of left over soap  is thrown away every year in the USA. It is $4 billion dollars in 6 years.oatmeal soap2

Here is the way to save the planet, be creative and have fun.

What you need:
• soap left overs
• heavy cream, water, green tea
• paper plate
• butter knife
• mold
• oats ( optional)
• essential oils (optional)
• vitamin E (optional)

What you do:
• Collect all of your little pieces of soap. These are usually the ones that have become small.
• Gather all of the mutant soaps and put them on a paper plate. Get your knife  and cut all of the soap into tiny pieces. The smaller the better usually.
• In a double boiler, heat the liquid you chose (milk, water, tea, etc.) to 170ºF-180ºF (76ºC-82ºC). The water must be warm, not boiling.
• Add the chopped soap while stirring slowly and constantly.
• Reduce the heat so that the liquid/grated soap come to a simmer.
• Stir slowly (but not constantly), until the grated soap turns into liquid.
• Add additives if you want. This is not required but might be something you’d like to do to improve the final soap. Additives would include such items as exfoliating items (for example, oat flakes, lavender flowers, etc.), essential oils, food coloring and so forth. If adding, stir them in well.
• Immediately pour the mixture into the mold(s) and let it cool.

Soap Making Tips.

Print Friendly

Leprechaun Trap

Leprechaun Trap cover

What you need:Leprechaun Trap
• glass
• toothpick
• double sided tape
• scissors
• green and yellow construction paper
• pencil
• lego pieces
• coins

What you do:
• Cut strips of green and yellow paper.
• Tape the strips around the glass, layering them as you go up the glass.
• Cut a circle of paper slightly smaller than the opening of the top of the glass.
• Tape the paper circle to the toothpick to create a secret swinging trap door.
• Build a ladder for the leprechaun out of lego pieces
• To tempt the leprechaun into your trap balance a few coins on the center of the trap door.
• On the morning of St. Patrick’s Day, most children will find that the tricky leprechaun has managed to escape in a glittery trail of green dust — but not before leaving them a few gold coins in the bottom of the trap.

Print Friendly

St. Patrick’s Crafts

St. Patrick's Crafts

Lucky Rainbow CoverLucky Rainbow

 

 

 

Snake for KidsSnake for kids

 

 

 

Spring FlowersSpring Flowers

 

 

 

Lucky Banner

Lucky banner cover

 

 

 

Macaroni kid shamrock craftMacaroni Shamrock

 

 

 

Shamrock Pin CoverShamrock Pin

 

 

 

 

Lucky RainbowLucky Rainbow Cover

 

 

 

Little TreeLittle tree

 

 

 

 

 

Leprechaun TrapLeprechaun Trap cover

Print Friendly

Watercolor Mug

Watercolor Mug cover

What you need:Watercolor mug
• Ceramic white coffee mug
• Old or Disposable Bowl/Container
• Hot water
• Nail Polish
• Gloves

What you do:
• Fill the bowl with warm water.
• Add a drop of nail polish to the water and let it spread out.
• Dip your mug in the water. (You can use nail polish remover to remove any excess nail polish on the bottom and inside of the mug or sections that got messed up.)
• Carefully pat mug dry with paper towel.
• You can repeat with additional colors if you want.
• Once you’ve achieved the look you want, let it sit for at least two hours.

Tip: Do it outside. Hand wash the mug.

Print Friendly

DIY Ballerina

DIY Ballerina Cover

What you need:DIY Ballerina1
• Flexible wire
• Napkin
Mod Podge
• Thread
• Pliers
• Scissors

What you do:DIY Ballerina2
• Bend the wire into a “skeleton” of the figurine.
• Tear the rest of napkins into 1/2 inch wide strips.
• Take your wire outline and wrap it with paper strips, then cover it with the Mod Podge.
• Let it dry.
DIY Ballerina3 Fold the napkin as if you were going to cut out a snowflake.
• Choose the right length of the dress for you ballerina and cut the napkin.
• Round the  hemline.
• Curl the “dress” in two directions for the best folds.
• Prepare at least two dresses for one ballerina.
• Make  little holes at the top and the sides of a dress and put it on a figurine.
• Take a thread and wind it around the waist of the ballerina.

Print Friendly

Sock Nicholas

Sock NIcholas Cover

What you need:Sock Nicholas
• White sock
• 2 Rubber bands
• Stuffing
• Fabric markers

What you do:
• Fill the sock with stuffing.
• Rubber band the top of the sock closed.
• Put another rubber band 3/4 of the way to the top of Nicholas.
• Draw yeas and nose.
• Use the top of your sock for a fashionable hat for Nicholas.

Print Friendly

Sock Snowman

Sock snowman cover

What you need:Sock Snowman
• White sock
• Scissors
• 2 Rubber bands
• Rice
• Fabric markers

What you do:
• Cut off the top of the sock from the foot.
• Turn the top of the sock out.
• Attach the rubber band tightly to the bottom  of the sock.
• Turn the sock right side out again.
• Fill the sock with rice.
• Rubber band the top of the sock closed.
• Put another rubber band 3/4 of the way to the top of your snowman.
• Tie a scarf around your snowman’s neck.
• Draw yeas, nose and buttons.
• Use the toe of your sock for a fashionable hat for your snowman.

Print Friendly

Bloody Candle

Bloody candle cover

What you need:Bloody candle
• White candle
• Red wax candle or red crayon
• Matches or Lighter / hair dryer if your are using a crayon

What you do:
•Light a red candle and let it drip down onto the top and sides of the white candle.
• If you are using a red crayon, just hold it over the edge of the white candle. Using the hair dryer blow the air downwards.
• Display.

Print Friendly

Web Candle

Web candle cover

What you need:Web candle
• Wax candle
• Pencil
• Alcohol wipe
• Toothpaste
• Paper to put the candle on

What you do:
• Draw a spider web on the candle by pushing the pencil into the wax.
• Trace the design several times with the pencil applying pressure.
• Wipe the candle with the alcohol wipe to get rid of the extra wax.
• Using your finger dab some toothpaste over your web design.

Print Friendly

Treasure Chest

Treasure Chest Cover

What you need:treasure chest
• Small box with lid
• Seashells
• Tacky glue

What you do:
• Organize the shells, according to size, shape, and color.( The kinds of shells you have will play a big role in your design. The ones you have most will be your “filler” shells, covering most of the box. The ones you have fewest perhaps will go on the corners. If you have any special shells, use them for the focal point on the top.)
• Start gluing. Begin with the corners. Glue in place any large or special shells.
• Then fill in around them with your smaller, “filler” shells.
• Fill in all empty spaces with shells. Add any additional shells as you see fit.

There can never be too many!

Print Friendly

Egg Holder

Egg Holder Cover

What you need:egg holder
• Egg carton
• Scissors
• Paint
• Brush
• Feathers
• Glue

What you do:
• Cut out an egg carton section.
• Paint it in any color you wish.
• Let it dry.
• Paint one end of it orange or yellow for the beak.
• Glue feather to the opposite side of the section.
• Put a colored egg inside of the egg holder and enjoy!

Print Friendly

Chick Chat

Chick Chat

What you need:chatty chicks
• Egg
• Googly eyes
• Sharpie
• Knife
• Glue

What you do:
• Break the bottom off your egg by tapping around the egg with a knife and then cracking the top off.
• Wash the egg and let it dry.
• Glue the googly eyes to the egg shell.
• Draw a mouth with the sharpie.
• Let your chicks chat!

Print Friendly